Super E Partial Carburetor Kit for 1966-'84 Big Twin Models, 5 Gallon Tanks (no manifold and mounting hardware included)
Choose Favorites List

Super E Partial Carburetor Kit for 1966-'84 Big Twin Models, 5 Gallon Tanks (no manifold and mounting hardware included)

Item #: 11-0418
0.0 out of 5
0 reviews | Write a Review
$566.95

Fitment:

  • 1966-'84 Big Twin Models - 5 Gallon Tanks
  •  

Features and benefits:

  • Four fuel delivery ports – Better throttle response
  • O-ring sealed idle mixture screw • Increased air flow for more power
  • Super E 1 7/8" (47.6mm) bore – for engines up to 100" displacement 
  • Adjustable enrichment starting system –does not restrict air flow like a conventional choke
  • Adjustable accelerator pump
  • S&S chrome teardrop air cleaner
  • Two cable throttles required – see notes

 

Kit Contents:

  • Super E  assembly
  • S&S chrome teardrop air cleaner kit

 

Notes:

  • 1979-'80 engines may be equipped with either o-ring or band style heads. Check before ordering.
  • Not legal for sale or use on CA or EPA pollution controlled motorcycles.

 

 

 

Customer Reviews

There are no reviews for this product yet. Be the first!

Write a Review

Required An asterisk is used to visually indicate that a field is required.
Would you recommend this product? Required Field
Stock motorcycles 1980 or earlier must be updated to a two cable pull open/pull closed throttle control system. A single cable pull open system cannot pull the throttle closed in case the throttle should accidentally stick in the open position. S&S offers high quality throttle cable kits in several lengths for this purpose. A press-on sleeve is also available to increase the diameter of the throttle grip area of 1972 and earlier handle bars to 1", allowing installation of modern throttle assemblies. See Section 7 for throttle cables and press-on sleeves. S&S "Shorty" carburetors will not fit HD® ironhead Sportster® models with vertical magnetos due to clearance problems between the magneto and the carburetor. Shovelhead engines with five gallon gas tanks and cylinders that are taller than stock require a special notched air cleaner cover to clear the gas tank. Since these taller engines also require a special length manifold, select a carb with a notched air cleaner cover without a manifold from the chart and refer to the manifolds starting on page 5-50 - 5-51 to select the correct length manifold. S&S does not recommend polishing or chrome plating Super E & G carburetors. Our repair department has seen many carbs with passages plugged with polishing compounds and some carbs that had been destroyed because the polishing or chrome plating had altered critical machined surfaces. Recommended for closed circuit use only. S&S Super E & G carbs shown are not approved for use on motor vehicles operated on California public highways, or in other states where similar pollution laws may apply. The user shall determine the suitability of the product for his or her use and shall assume all risk and liability in connection therewith.
1

Super E Carb Body Assembly

Item #: 11-2381
1

Super G Carb Body Assembly

Item #: 11-2391
2
2
3
4
5
6
8
8
9
9
10
11
11
12
13

Idle Mixture Screw

Item #: 11-2354
13

Idle Mixture Screw (5 pack)

Item #: 11-2378
13
15
15
16
17
18
18
19
19
20
22
22
23
25
25
26
27
27
28
29
29
30
31
31
33
33
34
34
35
36
37
37
38
38
39
39
40
40
41
41
42

Pump Cap O-Ring

Item #: 50-8012
42

Pump Cap O-Ring (10 pack)

Item #: 50-8100
43
44
44
45
45
46
46
47
48
48
49
51
52
52
52
54
54
54
54
54
55
56
57
58
59
60

VOES Fitting Cap

Item #: 50-8372
61

9" VOES Oil Return Hose

Item #: 19-0395
Disclaimer

NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. NOT LEGAL FOR SALE OR USE ON ANY EPA POLLUTION CONTROLLED MOTOR VEHICLE.