S&S<sup>®</sup> IST Guardian<sup>™</sup> Diagnostic System For 1984-'06 HD<sup>®</sup> Big Twins And 1986-'06 HD<sup>®</sup> Sportster<sup>®</sup> Models

S&S® IST Guardian Diagnostic System For 1984-'06 HD® Big Twins And 1986-'06 HD® Sportster® Models

Item #: 55-5075
0.0 out of 5
0 reviews | Write a Review
$387.95

On top of a 3-step break-in rev-limiter function, the Guardian Diagnostic System offers engine builders and tuners some powerful diagnostic tools to use with the S&S® IST ignition module. Fits:1984-'06 HD® big twins, 1986-'06 HD® Sportster® models. All new S&S® IST ignition modules. Features and Benefits: Adjust the rev-limiter. Modules are factory set to 6,250 rpm rev-limit, but this can be set to any value up to 7,200 rpm. Scan tool function allows you to view diagnostic test codes (DTCs) or clear history DTCs. Calibrate the speedometer in 2004-'06 HD® models. Look at live data (rpm, manifold absolute pressure, engine temperature, battery voltage, spark timing, dwell, and coil current) for both cylinders while the engine is running, to aid in service work or performance development. Look at history information (number of starts, number of revlimiter hits after the break-in rev-limit has expired, amount of time spent in various operating conditions, maximum temperature reached, current rev-limit, total engine cycles and running time)*The final rev-limit can be set to any value up to 7200 rpm using S&S® IST Guardian Diagnostic software. Available for modules sold separately only. Kit contains PC software CD, Translator unit, adn Adaptor cables. System Requirements: Microsoft® Windows® 2000 or higher operating system. Pentium II 350 MHz processor or faster/equivalent, Pentium III 500 MHz processor or faster/equivalent preferred. Minimum 64 MB RAM, 128 MB or more recommended. At least 300 MB of free hard drive space. CD-ROM or DVD-ROM drive required for installation. Keyboard and mouse (or equivalent pointing device). 9-pin serial port for communication with ignition modules or serial to USB adapter (PC must have 9-pin serial port for communication with ignition module. Otherwise, a serial to USB adapter must be used.)

Customer Reviews

There are no reviews for this product yet. Be the first!

Average Customer Rating

0.0 out of 5
 

0% of customers would recommend this product (0 out of 0)

Ratings Breakdown

  • 0% Rated this
    5
  • 0% Rated this
    4
  • 0% Rated this
    3
  • 0% Rated this
    2
  • 0% Rated this
    1

Write a Review

Write a Review

Would you recommend this product?
Showing 0 - 0 of 0 Reviews
PC must have 9-pin serial port for communication with ignition module. Otherwise, a serial to USB adapter must be used. Not compatible with S&S IST ignition modules manufactured before 10/01/2003. Software can be by sending the IST module to S&S Cycle.