585G Gear Drive Camshaft Kit for '06 HD<sup>®</sup> Dyna<sup>®</sup> and 2007-'16 Big Twins
Choose Favorites List

585G Gear Drive Camshaft Kit for '06 HD® Dyna® and 2007-'16 Big Twins

Item #: 33-5268
5.0 out of 5
1 review | Write a Review

This 585G cam is designed for 2006 Harley-Davidson® Dyna® and 2007-16 big twins with 88 to 95 inch engines with compression ratios from 10:1 to 10.5:1 and 100 and 107 inch engines at 9.7:1 to 10.5:1 compression and stock oil pumps. Complete kit includes cams with inner gears and installation kit.

Can be used with stock valve springs.



Customer Reviews

There are no reviews for this product yet. Be the first!

Write a Review

Required An asterisk is used to visually indicate that a field is required.
Would you recommend this product? Required Field
Fuel injection tuning required. Pinion shaft run-out must be checked before installing S&S® gear drive cams. A hydraulic press and other professional tools are required to install S&S gear drive cams. Additionally, material must be removed from the inner surface of the stock gearcover. The stock crankcase may require clearancing for S&S .625", .640", and .675" lift cams. S&S recommends that gear drive cams be installed by a professional mechanic. Due to the inheraent characteristics of gear drives, you may experience more valve train noise with gear driven cams. Oversized and undersized gears are available to help achieve correct gear lash. We have found that with 160 lb. of valve seat force, the S&S gear drive cams will perform well up to 6200 rpm. If higher rpm is anticipated, valve springs that provide higher seat force should be used. Not legal for sale or use on CA or EPA pollution controlled motorcycles.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.