This cam is designed for 88 to 95 inch engines with compression ratios from 10.0:1 to 10.5:1, and 100 and 107 inch engines with 9.7:1 to 10.5:1 compression.
S&S 585G Gear Drive Cam set with inner gears fits 2006 Dyna® and 2007-up big twins with stock oil pumps. Camshaft set with inner gears only. Installation gasket and hardware kit not included. Can be used with stock valve springs.
Fuel injection tuning required.
Pinion shaft run-out must be checked before installing S&S® gear drive cams.
A hydraulic press and other professional tools are required to install S&S
gear drive cams. Additionally, material must be removed from the inner
surface of the stock gearcover. The stock crankcase may require clearancing
for S&S .625", .640", and .675" lift cams. S&S recommends that gear drive
cams be installed by a professional mechanic.
Due to the inheraent characteristics of gear drives, you may experience
more valve train noise with gear driven cams. Oversized and undersized
gears are available to help achieve correct gear lash. We have found that
with 160 lb. of valve seat force, the S&S gear drive cams will perform well
up to 6200 rpm. If higher rpm is anticipated, valve springs that provide
higher seat force should be used.
Not legal for sale or use on CA or EPA pollution controlled motorcycles.