FAQ  •  Register  •  Login

Piston height

Moderators: Curt!, Pa

<<

celticdodge

Posts: 139

Joined: Mon Mar 27, 2006 5:29 am

Location: USA

Post Sat Apr 21, 2012 9:45 am

Piston height

Anybody know what the piston height above deck is supposed to be on a KHK ? Thanks. :D :D
<<

thefrenchowl

User avatar

Posts: 584

Joined: Fri Mar 10, 2006 3:18 pm

Location: Crewe, Great Britain

Post Sat Apr 21, 2012 2:05 pm

Re: Piston height

Hi, celticdodge

Same as KH... I did measure mine last year when building my supercharged version

Both pistons 60 thou above deck as std, heads, front 120 thou deep, rear 124 thou. So 60 and 64 thou of squish.

Skimmed the cyl bases by 20 thou to get pop up of 80 thou and 40/44 thou of squish...

Patrick
<<

celticdodge

Posts: 139

Joined: Mon Mar 27, 2006 5:29 am

Location: USA

Post Sun Apr 22, 2012 5:56 am

Re: Piston height

Thanks Patrick,by the way have you had a chance to fine tune your Bonneville supercharged bike and take it for a ride ? :D :D
<<

thefrenchowl

User avatar

Posts: 584

Joined: Fri Mar 10, 2006 3:18 pm

Location: Crewe, Great Britain

Post Sun Apr 22, 2012 1:22 pm

Re: Piston height

No in a short answer,

Engine is partially dismantled at the moment to check how it coped, not bad...

Looking for clubs/organisations willing to let me have a go on their mile long races to tune it later on in the year...

As far as fine tuning, my fuel pipe was too small, did lean the engine a lot after 2 miles. Increased it from 3/8" to 1/2" and added an empty SU float chamber next to the S&S carb to have more capacity. Droped the foot pegs a touch for more comfort, new brake pedal, that's about it for physical mods...

Patrick

Return to K-Models

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.