FAQ  •  Register  •  Login

Part ID help #2

Moderators: Curt!, Pa

<<

Graybeard

User avatar

Posts: 125

Joined: Thu Dec 16, 2004 1:01 am

Location: Southeast AZ

Post Thu Feb 10, 2011 7:32 am

Part ID help #2

This is a bare hub.The inside of the drum measures 7-7/8" and the depth is 1-1/2".The overall width of the hub is approx 3-3/4". Large flange OD is 10" and the small flange OD is 3-5/8".On the inside of the drum is a stamping that says W1165 or it may be WI165. There is also a Dualcast emblem with the number 2 below it.

Image

Image

Image

Image

Image

Image
Aries51 (AKA Graybeard)
ROB in AZ

"Get on your bad motor scooter and ride"-Sammy Hagar
<<

RUBONE

Posts: 380

Joined: Fri Nov 30, 2007 7:24 pm

Post Thu Feb 10, 2011 9:46 am

Re: Part ID help #2

That appears to be a Triumph hub for a SLS vented brake assembly used from '55 up on certain models. There is a different (pie crust) version used in '54 only.
Robbie
<<

jib

Posts: 570

Joined: Sat Dec 10, 2005 3:36 pm

Location: devon,england

Post Thu Feb 10, 2011 12:13 pm

Re: Part ID help #2

as robbie says
Dude, check out that jibhead, he's crazy. Hasn't been sober for 40 years
<<

Graybeard

User avatar

Posts: 125

Joined: Thu Dec 16, 2004 1:01 am

Location: Southeast AZ

Post Fri Feb 11, 2011 6:31 am

Re: Part ID help #2

Thank You!
Aries51 (AKA Graybeard)
ROB in AZ

"Get on your bad motor scooter and ride"-Sammy Hagar

Return to General Whatever-Technical

Who is online

Users browsing this forum: No registered users and 2 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.