FAQ  •  Register  •  Login

KHK Cylinder Oiling

Moderators: Curt!, Pa

<<

Frankenstein

User avatar

Posts: 1531

Joined: Thu Jun 27, 2002 12:01 am

Location: Interlaken, NY USA

Post Mon Sep 21, 2009 7:22 am

Re: KHK Cylinder Oiling

Hi George, wish I could help you, but I never pulled mine. Did as thorough a job as I could flushing things out short of removal. Not by the book, maybe, but those screws sure act like they're in there to stay.
DD
<<

George Greer

User avatar

Posts: 947

Joined: Wed Aug 28, 2002 12:01 am

Location: Markt Einersheim, Germany

Post Mon Sep 21, 2009 8:33 pm

Re: KHK Cylinder Oiling

Herr Dr,

That's why I asked here about getting them out.

I think that I will be able to clean the passages out enough. But would like to remove them just to make sure that there's no crud that will eventually come loose and clog up such a tiny hole.

George
<<

thefrenchowl

User avatar

Posts: 584

Joined: Fri Mar 10, 2006 3:18 pm

Location: Crewe, Great Britain

Post Tue Sep 22, 2009 11:07 am

Re: KHK Cylinder Oiling

Hi George,

Inertia screwdriver should do the trick, the kind you hit with a hammer...

Patrick
<<

37ULH

Posts: 681

Joined: Mon Nov 25, 2002 1:01 am

Location: somerset, oh usa

Post Tue Sep 22, 2009 6:24 pm

Re: KHK Cylinder Oiling

Does anyone have a set of tappets as pictured 2nd from the left with 3 holes for sale?
Can anyone identify the source as to OEM and what models or are they aftermarket?
TIA
Steve
<<

44dwarf

Posts: 318

Joined: Mon Feb 06, 2006 1:22 pm

Location: north central Ma.

Post Tue Sep 22, 2009 7:40 pm

Re: KHK Cylinder Oiling

Try this

http://www1.mscdirect.com/CGI/NNSRIT?PM ... O=71115729

If it were me I'd slide a solid slug inside the bore so the area is well supported.

44
"Smok'in the competition NOT Tobacco"
"Transplant organs, Don't bury them!"
Why dwarf? 5/8 scale race cars! http://www.dwarfcarracing.com
<<

37ULH

Posts: 681

Joined: Mon Nov 25, 2002 1:01 am

Location: somerset, oh usa

Post Tue Sep 22, 2009 8:35 pm

Re: KHK Cylinder Oiling

Afraid of striking them, use an impact wrench instead of a driver.
Previous

Return to K-Models

Who is online

Users browsing this forum: No registered users and 2 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.