Need some opinions real quick. I have a bike a customer brought in today. It's a 2000 Titan with 113" motor. The ring gear on the clutch basket is bad,and I have a replacement. The clutch was no problem to disassemble, but the nut that holds the compensating sprocket on the motor WILL NOT BUDGE.
I put the bike in first gear, straped the rear FAT tire to my bike lift and tried a 1 1/2" socket and large rachet. No movement. Next a 1/2 impact, no movement. Then a bit of local heat to the nut and teh impact (both air and electric), still no movement. Have tried both directions for a couple of hours to no avail.
Does any one have any options to try, short of destructive means?