Board index Flathead Power-Technical Questions, Answers, and Suggestions Indians 57" Stroker oiling mods

57" Stroker oiling mods

Post Mon Jan 19, 2009 12:30 pm

Posts: 13
Looking for advice from people who have built 57" stroker Scout motors, I am at the stage where I am just about to plumb in my engine to the tanks, any modifications from standard Sport Scout or 741 spec that you can recommend?

thanks
Steve

Post Wed Jan 21, 2009 9:53 am

Posts: 13
Image

Post Fri Jan 23, 2009 7:18 pm

Posts: 11
Stainless braided lines and a puke can for starters? A good mesh breather, not the puny flap discs on cam cover side
Ironwigwam
1957 S/VG
1959 M/BG

Post Sun Jan 25, 2009 3:13 am

Posts: 13
Rocky,

can you recommend a supplier of a "good mesh breather" to replace the flap disc one?

Steve

Post Wed Jan 28, 2009 4:31 am

Posts: 11
They are on Ebay all the time, I'll try and find a link for you.
Iron Wigwam
1957 S/VG
1959 M/BG

Post Thu Jan 29, 2009 7:59 am

Posts: 13
mineral94 wrote:
They are on Ebay all the time, I'll try and find a link for you.
Iron Wigwam
1957 S/VG
1959 M/BG


thanks, searches on UK ebay dont always pick up Indian stuff in the US


Return to Indians