FAQ  •  Register  •  Login

57" Stroker oiling mods

Moderators: Curt!, Pa

<<

blackbob

Posts: 13

Joined: Fri Jan 02, 2009 6:05 am

Post Mon Jan 19, 2009 12:30 pm

57" Stroker oiling mods

Looking for advice from people who have built 57" stroker Scout motors, I am at the stage where I am just about to plumb in my engine to the tanks, any modifications from standard Sport Scout or 741 spec that you can recommend?

thanks
Steve
<<

blackbob

Posts: 13

Joined: Fri Jan 02, 2009 6:05 am

Post Wed Jan 21, 2009 9:53 am

Re: 57" Stroker oiling mods

Image
<<

mineral94

Posts: 11

Joined: Sun Sep 21, 2008 7:50 am

Post Fri Jan 23, 2009 7:18 pm

Re: 57" Stroker oiling mods

Stainless braided lines and a puke can for starters? A good mesh breather, not the puny flap discs on cam cover side
Ironwigwam
1957 S/VG
1959 M/BG
<<

blackbob

Posts: 13

Joined: Fri Jan 02, 2009 6:05 am

Post Sun Jan 25, 2009 3:13 am

Re: 57" Stroker oiling mods

Rocky,

can you recommend a supplier of a "good mesh breather" to replace the flap disc one?

Steve
<<

mineral94

Posts: 11

Joined: Sun Sep 21, 2008 7:50 am

Post Wed Jan 28, 2009 4:31 am

Re: 57" Stroker oiling mods

They are on Ebay all the time, I'll try and find a link for you.
Iron Wigwam
1957 S/VG
1959 M/BG
<<

blackbob

Posts: 13

Joined: Fri Jan 02, 2009 6:05 am

Post Thu Jan 29, 2009 7:59 am

Re: 57" Stroker oiling mods

mineral94 wrote:They are on Ebay all the time, I'll try and find a link for you.
Iron Wigwam
1957 S/VG
1959 M/BG


thanks, searches on UK ebay dont always pick up Indian stuff in the US

Return to Indians

Who is online

Users browsing this forum: No registered users and 3 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.