FAQ  •  Register  •  Login

Solid state regulator question

Moderators: Curt!, Pa


Chris Haynes

Posts: 2673

Joined: Wed Jul 05, 2000 12:01 am

Location: Los Angeles, CA

Post Sat Oct 25, 2008 7:55 pm

Solid state regulator question

I just picked up a 1950 Panhead that has a solid state regulator on it. All the wiring from the regulator to the dash is missing. Wires are dangiling here and there. The regulator is still connected to the generator, although I don't know if this is correct or not. Does anybody recgonize this regulator? Which wires go from it to where on the ignition switch? I have never messed with one of these before. :oops:
Thanks in advance.

john HD

User avatar

Posts: 372

Joined: Sun Mar 19, 2006 5:26 pm

Location: madison wisconsin usa

Post Sat Oct 25, 2008 9:03 pm

Re: Solid state regulator question


not knowing the manufacture i would say in general it would be:



krazy loop

Posts: 646

Joined: Sat Jul 31, 2004 12:01 am

Location: Detroit

Post Wed Oct 29, 2008 6:53 pm

Re: Solid state regulator question

If you look at the back of the unit you might find a manufacturer, etc., and then do a google for the spec sheet or instructions.
New Knuckleheads? Thank, you, Jesus!!

Return to Pans

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.