FAQ  •  Register  •  Login

Modified K Engine Part 2

Moderators: Curt!, Pa

<<

Tim The Grim

Posts: 30

Joined: Tue Sep 14, 2004 12:01 am

Location: El Paso, Texas

Post Mon Nov 26, 2007 8:07 pm

Modified K Engine Part 2

Here are some more photos. I started a new topic so the pictures wouldn't take too long to load in the 1st one.

A couple more of the cases and oil tube set up.

2 of the " T " bracket that fits between the cases and mounts to the frame on that part in the 2nd frame pic.

And finally my sprocket cover / clutch actuator that I machined using an idea from an old Arlenn Ness product that he
made for Sportsters in the early 80s but interfered with the rear exhaust on a KHK.


Image

Image

Image

Image

Image

As Porky Pig would say... "That's all folks"

Patrick, That's a real nice concept you have there and great artwork too. Thanks for your thoughts.


Tim
'54 KHK since 8/70
'76 XLCH since 4/85
'97 Valkyrie since 10/96
<<

Tim The Grim

Posts: 30

Joined: Tue Sep 14, 2004 12:01 am

Location: El Paso, Texas

Post Mon Dec 03, 2007 10:24 pm

Re: Modified K Engine Part 2

Here are the pictures of my KR cams of unknown letter designation. I think they are "A" grind.
The other ones with the color on the gears are my Wire EDM cut lobes that I designed using Autocad and cam timing specs from the KR KRTT book. I ground most of the bad lobes off but left a "Key" for reference and then silver soldered my lobes on to the OEM gears.

My lobes are D-2 tool steel and have the same lift at .395 but have a little less radical profile than the real KR grind.

Image
Image
Image

To reference an other post...When I had a set of KHK cams, which had not come with my 54 KHK when I bought it,
they were marked KHK on the 2 intake cams.
I had the shop that 1st built my motor for me put them in so I have no idea of their origin date.

Tim
'54 KHK since 8/70
'76 XLCH since 4/85
'97 Valkyrie since 10/96
<<

suicideshovel65

Posts: 217

Joined: Thu Feb 10, 2005 1:01 am

Location: Palo Alto, CA

Post Tue Dec 04, 2007 2:48 am

Re: Modified K Engine Part 2

Nice!

Return to Morthodites-"Non Factory"

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.