FAQ  •  Register  •  Login

Drake.......

Moderators: Curt!, Pa

<<

Admin

User avatar

Posts: 324

Joined: Sun Sep 19, 1999 12:01 am

Location: Viola, WI

Post Sat Apr 06, 2002 9:11 am

Drake.......

Recieved an e-mail from an old friend with
interesting news...
He´s bought a midget with a Drake Knuckle in
it!
Any info on the Drake engines available out
there?
<<

john k. endrizzi

User avatar

Posts: 726

Joined: Thu Dec 09, 1999 1:01 am

Location: nekoosa,wisconsin,usa

Post Sat Apr 06, 2002 3:27 pm

Hi Anders,
I can't give you specifics, but one of the "California" magizines did an in depth article on the water cooled Drake Knuckles a couple years ago. It went into the backround of the man and was a very interesting little history.Unfortunately due to mysterious memory loss I can't bring the source to mind...........possibly due to the ravages of the 60's!

------------------
Smoke 'em till the wheels fall off!
<<

little stan

Posts: 41

Joined: Sun Nov 11, 2001 1:01 am

Location: houston, tx

Post Mon Apr 08, 2002 5:17 pm

Back in the mid 70's Easyrider Magazine did an article on "water cooled knuckleheads" with several pictures. I can't remember what year but maybe if you contacted them they might be of assistance.
-little stan
<<

Guy Winton III

Posts: 108

Joined: Wed Dec 01, 1999 1:01 am

Location: San Diego

Post Mon Apr 08, 2002 8:32 pm

I think it's reprinted in one one the Easyrider Tech books (#1??)

As I remember...it shows plumbing....

[This message has been edited by Guy Winton III (edited 08 April 2002).]
<<

HurtnDude

Posts: 233

Joined: Wed Nov 07, 2001 1:01 am

Location: Richmond Va

Post Thu Apr 11, 2002 1:47 pm

I remember an article, with pics, in the novelty softcover, "Earlyriders". A water-cooled knuckle with jackets on the jugs; but I don't recall the Drake name! Midget racers were the application , though.
<<

Boogiemanz1

Posts: 896

Joined: Mon Mar 06, 2000 1:01 am

Location: Bixby,OK, USA

Post Thu Apr 11, 2002 5:01 pm

Admin, I have a copy of that article in my hand. I will try to get it scanned and to you today. as of this article a guy named Edgar Elder is supposed to have the original patterns
<<

flattyflyer

Posts: 252

Joined: Wed Feb 27, 2002 1:01 am

Post Thu Apr 11, 2002 11:28 pm

I think Albert Drake was from Portland Oregon. His kid is alive and writes for one of the hot rod mags. Streetrodder Rodder digest or such. He also has a book out about racing (cars and midgets) in the 40's and 50's ..Perhaps you can buy the book or magazine and contact him! Hope this helps.
<<

1937hd45

Posts: 233

Joined: Thu Oct 14, 1999 12:01 am

Location: Ridgefield,Ct 06877

Post Fri Apr 12, 2002 2:16 am

There are only two cars that I regret selling, a two man race car from the '30's and a Knuckle head powered midget. I had the midget for about an hour and a friend asked if I'd sell it. Sure did, and for $100.00! it was the early 1970's and I can't fit in a midget. Turned out to be a Pop Dryer built car for Bill Schindler, one of the top drivers in the '40-'50's. It is under retoration now on the other side of the state.
<<

Boogiemanz1

Posts: 896

Joined: Mon Mar 06, 2000 1:01 am

Location: Bixby,OK, USA

Post Fri Apr 12, 2002 2:40 am

Anders the article is on the way to the "info" e-mail...jb

Return to Knuckles

Who is online

Users browsing this forum: Google [Bot], Yahoo [Bot] and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.