FAQ  •  Register  •  Login

star hubs

Moderators: Curt!, Pa

<<

h.d.ryder

Posts: 287

Joined: Sun Nov 10, 2002 1:01 am

Location: Cranbrook B.C. Canada

Post Wed Nov 13, 2002 3:41 am

star hubs

Thanks for the welcome. My first question is, is it recomended to rebuild star hubs as stock, or is it a better fix to upgrade to timken brgs., and is it a simple project to upgrade to timken brgs. These hubs are for a 42 W.L.C. that I plan on putting on lots of trouble free miles.
<<

BRAD

Posts: 184

Joined: Tue Oct 15, 2002 12:01 am

Location: Naples, Florida

Post Wed Nov 13, 2002 3:50 am

rebuild as stock, grease every 1,000 miles, they will last a long,long time.
<<

HOOTER

Posts: 1319

Joined: Sun Feb 25, 2001 1:01 am

Location: State College, Pa.

Post Wed Nov 13, 2002 4:56 am

Also watch when you grease them. Over greasing can push grease into the brake drum area. Turning what little braking power you have into Zilch.

HOOT
<<

Sideblåsern

Posts: 96

Joined: Tue Apr 09, 2002 12:01 am

Location: Vadsø, Norge

Post Thu Nov 14, 2002 11:36 pm

I fully agree on the above. I did the conversion of a star-hub, from original to SKF brg. And as I now can see I actually weakened the hub. And the springer brake is'nt that bad. I had them fitted with some soft brake lining, and It did a lot to mine. You can't compare them to discs, but when you get used to them, they are just fine. Also important I think, is to use a proper brake cable, not the tiny thing they sell as repro from V-twin or others. I actually use to modify a clutch cable or a cable for hydra drums.

Return to 45 Flatties

Who is online

Users browsing this forum: Majestic-12 [Bot] and 4 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.