Board index Flathead Power-Technical Questions, Answers, and Suggestions 45 Flatties WL wiring

WL wiring

Moderators: Curt!, Pa

Post Wed Jan 09, 2013 12:20 pm

Posts: 17
Location: POLAND
I'm planning to make the wiring for the WL civilian which I'm building now. I know that there are a lot afetrmarket wiring kits for about $100 but I can buy the wires that looks like the old ones (cotton braided) and make the wiring myself. Than it can cost about $20-30 and I will enjoy it :D
I found a lot of diagrams and so I know a lot of about it, a have an experience because it is not my first bike, and lately I make wiring for my Evo.
From diagrams I can figure out the colours, and from parts catalog I know how the wires are connected into one isolation.

I need only one. Can you give me the lenghts of individual wires.
Here is for example wiring diagram with colours: ... iagram.jpg

If you have any pictures of seperated wirings please e-mail to me.

Post Fri Jan 11, 2013 6:31 pm

Posts: 2677
Location: Los Angeles, CA
You may be able to string wire from A to B but you can't find all the correct terminals or have the wire in a braided harness as original. To my knowledge there is only one person in the world with the machine to braid wiring harnesses.
You can buy the correct harness with all the correct terminals from eBay seller watertowngrl. ... 460bc5af6f

Return to 45 Flatties