FAQ  •  Register  •  Login

Chief rods

Moderators: Curt!, Pa

<<

Cotten

User avatar

Posts: 2674

Joined: Thu Sep 30, 1999 12:01 am

Location: Central Illinois, USA

Post Wed Nov 01, 2000 2:40 am

Here's afew nominal specs: female rod width = 1.625"; Bore = 1.500"; center to center = 8.125"

I tried to average several sets, but I imagine these nominal measurements approximate the blueprints.
<<

Cotten

User avatar

Posts: 2674

Joined: Thu Sep 30, 1999 12:01 am

Location: Central Illinois, USA

Post Wed Nov 01, 2000 2:34 pm

What did you mean by >and how large is the small end outside?<

The wristpin bushing OD? (I have to get back to the shop to mic one.
<<

Cotten

User avatar

Posts: 2674

Joined: Thu Sep 30, 1999 12:01 am

Location: Central Illinois, USA

Post Sat Nov 04, 2000 2:03 am

Bore center to the tallest point is about .665"
If you have .030' clearance, I wouldn't worry about it; that gap would be a tremondouw insulation from the combustion heat.

Return to Indians

Who is online

Users browsing this forum: Majestic-12 [Bot] and 2 guests

cron
Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.