Board index Flathead Power-Technical Questions, Answers, and Suggestions Knuckles Clutch Adjustment

Clutch Adjustment

Moderators: Curt!, Pa

Post Thu May 29, 2008 5:49 am

Posts: 29
Location: Boston, MA
I have a new (V-Twin), I know, clutch pack with about 600 miles on it

I have taken out what I can at the rod and with the adjuster screw. I seem to have gone about as far as I can go but yet it still engages about 2" inches up from the running board.

Any suggestions on how I can get more adjustment out of it?


Post Wed Jun 11, 2008 8:02 am

Posts: 72
Location: Planet Earth
Its the lenghh of the rod. I went through the same problem.
These aftermarket rods all seem to be differents lengths, depending on the maker.
I would try another rod... Good luck !

Return to Knuckles