Here's a picture of my new build: it's a 87ci Knuckle in a VL frame (modified).
Just put the first 350 miles on last weekend. Runs great and handles very easy
For more details go to http://www.harleyparts.ch/HDMac/project_9.htm
A brand new 87ci Knucklehead from V-Twin and stock 4speed HD tranny.
Pinion Gear Removal – ‘39-53
The ‘39-53 pinion gears were a push or free sliding onto the pinion shaft, but should have no perceptible lash. Even a slight lash will usually result in noisy operation for which the other timing gears are often held responsible. To correct such a condition will require replacing the pinion gear and or pinion shaft. There is no nut holding the gear in place, like there is on ‘54-72 assemblies.
- Vol.2 M&O Guide
Users browsing this forum: No registered users and 2 guests