Board index Flathead Power-Technical Questions, Answers, and Suggestions Knuckles Linkert carb questions

Linkert carb questions

Moderators: Curt!, Pa

Post Wed Mar 01, 2000 3:48 pm

Posts: 3010
Location: Central Illinois, USA
Your M-5 would have a 3-bolt flange for small ports; Your FL heads would have large ports, for which manifolds have 4-bolt holes. I had to make my own. Otherwise, the Linkert ain't the most efficient carb in the world, but you can make it work on anything.

Post Wed Mar 01, 2000 3:49 pm

Posts: 582
Location: meridian, id. usa
Find an M74b and change over to oring style manifold. Or get a S&S e or mikuni and adapter save your sef some fuel starvation lean out when you lean on it problems before they happen

Post Thu Mar 09, 2000 1:48 am

Posts: 15
Location: Boston.Ma
use a 74b better for parts and you can find Kits and parts easier

Return to Knuckles