FAQ  •  Register  •  Login

oiling book

Moderators: Curt!, Pa

<<

jib

Posts: 570

Joined: Sat Dec 10, 2005 3:36 pm

Location: devon,england

Post Fri Apr 18, 2008 11:26 am

oiling book

book arrived today thanks pa,only had time so far for quick flick but i beleive that i havent wasted my money.regards jib
Dude, check out that jibhead, he's crazy. Hasn't been sober for 40 years
<<

Pa

Site Admin

Posts: 4674

Joined: Sun Mar 12, 2000 1:01 am

Location: Ohio USA

Post Fri Apr 18, 2008 7:12 pm

Re: oiling book

Glad you got it safely. I've read through it intensively and it got me going through my pumps, looking for the perfect start, for the books mods. Pa
<<

George Greer

User avatar

Posts: 961

Joined: Wed Aug 28, 2002 12:01 am

Location: Markt Einersheim, Germany

Post Fri Apr 18, 2008 9:30 pm

Re: oiling book

Pa..

Is that Jim Caseys book? If so.

I agree, I got my copy, read it and got started.

Got the flatside pump rotor already, filter and spring.

One thing I need to get .... The grey cast iron for the spacer and the tooling.

George
<<

45Brit

Posts: 1410

Joined: Tue Nov 27, 2007 2:29 am

Post Fri Apr 18, 2008 11:55 pm

Re: oiling book

who do i contact for this? I've been waiting for this to appear
Shoot, a man could have a good weekend in Dallas with all that stuff...
<<

Pa

Site Admin

Posts: 4674

Joined: Sun Mar 12, 2000 1:01 am

Location: Ohio USA

Post Sat Apr 19, 2008 7:54 am

Re: oiling book

Yeah George. That's the book.

45Brit... Jim will be posting how to obtain it as soon as he can. Pa
<<

45Brit

Posts: 1410

Joined: Tue Nov 27, 2007 2:29 am

Post Sat Apr 19, 2008 9:11 am

Re: oiling book

ok thanks for that
Shoot, a man could have a good weekend in Dallas with all that stuff...
<<

jib

Posts: 570

Joined: Sat Dec 10, 2005 3:36 pm

Location: devon,england

Post Sat Apr 19, 2008 9:56 am

Re: oiling book

hi george im going in to metal suppliest monday to find out if the can give idea.and am going to email jim about the rotor used in the modified pump wether it matters which one it is ie pre 41 or post 52 cause thats the only confusing bit in the whole book to me,regards jib
Dude, check out that jibhead, he's crazy. Hasn't been sober for 40 years
<<

George Greer

User avatar

Posts: 961

Joined: Wed Aug 28, 2002 12:01 am

Location: Markt Einersheim, Germany

Post Sat Apr 19, 2008 9:04 pm

Re: oiling book

Not a problem..

I got my flatside pump rotor from JW Boon in Holland... http://www.jwboon.com

I just emailed Rene about the parts....by the numbers that Jim listed in the book, and once I checked the web site.....simple email..

I have the tubing on hand, I just don't have the grey cast iron, for the spacer.

George
<<

Limey_Dave

Posts: 202

Joined: Mon Oct 02, 2006 3:08 pm

Location: Middle England UK

Post Sun Apr 20, 2008 6:37 pm

Re: oiling book

George
Look for a model engineers suplier in your area.
You can get cast iron bar from 25mm up in lengths of 300mm.
<<

George Greer

User avatar

Posts: 961

Joined: Wed Aug 28, 2002 12:01 am

Location: Markt Einersheim, Germany

Post Sun Apr 20, 2008 7:53 pm

Re: oiling book

Thanks Dave..

I know of only place for model railroading fans near me...

I will check it out.

George

Return to Shoot The Bull

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.