FAQ  •  Register  •  Login

New 45" Servi Car Electric Start System Pics

Moderators: Curt!, Pa

<<

Pa

Site Admin

Posts: 4730

Joined: Sun Mar 12, 2000 1:01 am

Location: Ohio USA

Post Sun Jul 17, 2005 12:59 am

New 45" Servi Car Electric Start System Pics

I took the first pics of her today fella's. One image is the components. The other three is the system mounted on a Servi Car kick start tranny. Comments and questions welcome! Thanks, Pa

Image

Image

Image

Image
<<

100incscoot

Posts: 2399

Joined: Wed Dec 31, 2003 1:01 am

Location: atascadero cal usa

Post Sun Jul 17, 2005 1:02 am

what about the ring gear or basket with one on it?
<<

Pa

Site Admin

Posts: 4730

Joined: Sun Mar 12, 2000 1:01 am

Location: Ohio USA

Post Sun Jul 17, 2005 2:01 am

That comes next along with both inner and outer chain covers. The relay will be separate too. Solo tops are then next. Then the belt drive. Several dozen starter ring gears are made already awaiting assembly to new baskets. Pa
<<

100incscoot

Posts: 2399

Joined: Wed Dec 31, 2003 1:01 am

Location: atascadero cal usa

Post Sun Jul 17, 2005 4:38 am

just some input here cause race bikes dont have e start but a good idea would be a ring gear that retrofits solo [kick only] clutch baskets
there are still tons of them out there
<<

BREWSKI

Posts: 919

Joined: Sat Mar 27, 2004 1:01 am

Location: RENO,NV. U.S.A.

Post Sun Jul 17, 2005 10:33 pm

The H-D kick start 45" clutch baskets require complete disassembly and the machining operation is dealing with a interrupted cut-not impossible,but need to be aware of. Good idea though. BREWSKI
<<

Pa

Site Admin

Posts: 4730

Joined: Sun Mar 12, 2000 1:01 am

Location: Ohio USA

Post Mon Jul 18, 2005 5:08 am

Brewski got it right Scoot. Thanks Brewski! Modification to the solo basket spacing is a must in order to incorporate the ring gear. No retro fits on this deal. The ring gear has a thickness which has to be compensated for in order to maintain basket location. We will probably rough face then finish with a grind to minimize deburring. "Had to edit" "a few to many did my thinkin last night" Pa

[This message has been edited by Pa (edited 18 July 2005).]

Return to Servi-Cars

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.