Board index Flathead Power-Technical Questions, Answers, and Suggestions K-Models Front KH cylinder needed

Front KH cylinder needed

Post Sun Oct 01, 2006 9:04 pm

Posts: 99
Location: Littleton, CO USA
8) I'd like to swap a rear KH barrel, #16581-54 for a front KH barrel in equal condition. Front #16561-54. The rear I have is in very good condition. Bore measures 2.778/2.780. Next oversize is .040 over.
Email or call me for particulars.
1-808-302-2000 Pacific time.


Return to K-Models