Board index Flathead Power-Technical Questions, Answers, and Suggestions K-Models k head gaskets ??

k head gaskets ??

Moderators: Curt!, Pa

Post Mon Aug 21, 2006 5:34 pm
jib

Posts: 575
Location: devon,england
hi seen these advertised ,anyone shed some light.
http://cgi.ebay.com/ebaymotors/Harley-K ... enameZWDVW

regards jib

Post Mon Aug 21, 2006 10:52 pm

Posts: 240
Location: Kirkland, WA, USA

You have to scroll down a little in the Ebay add. There were no head gaskets for K models, of any kind.

Barry55KH

Post Tue Aug 22, 2006 2:15 am
jib

Posts: 575
Location: devon,england
hi barry ,i read that as well,but the seller says that he has both 45 and k's and that they dont fit the 45 but are the same /right size etc for the k ,i realise that normaly k/kh/khk/kr have lapped and silver paint as gasket but thought that maybe these were an after market thing if the heads /barrel mateing surface was damaged or been over skimmed,regards jib

Post Tue Aug 22, 2006 8:54 pm
panic

Never mind, go back to sleep.
Last edited by panic on Wed Aug 23, 2006 7:43 am, edited 1 time in total.

Post Wed Aug 23, 2006 2:48 am
jib

Posts: 575
Location: devon,england
hi panic,i wondered if he'd meant that the gasket was the same as a k head,not that a k and a 45 were the same?regards jib

Post Wed Aug 23, 2006 4:26 pm

Posts: 919
Location: RENO,NV. U.S.A.
YEAH,it woulb be even FUNNIER if he claimed they were NOS gaskets. BREWSKI

Post Fri Aug 25, 2006 8:35 pm

Posts: 747
Location: Pa. , USA
the dudes way out there if he thought they could be for a flathead Ford.
Vintage roadracing, Class C, AHRMA # 335


Return to K-Models