Board index Flathead Power-Technical Questions, Answers, and Suggestions K-Models Road clearance

Road clearance

Moderators: Curt!, Pa

Post Thu Oct 22, 2015 4:27 am

Posts: 5
Hi All, I am thinking of running 16 inch wheels front and rear on my 54kh. It has had the front forks shortened 1 and a half inches to run a wide tyre for that low look. It is in a stock frame, stock shocks. I am concerned about road clearance into corners, All feedback appreciated.

Post Thu Oct 22, 2015 8:19 am

Posts: 54
Kresz.jpg (131.01 KiB) Viewed 165 times

Stock length front end. Rear shocks needed preloading to prevent pipes dragging. Front end got spacers. An inch and a half sounds like a lot.

Return to K-Models