FAQ  •  Register  •  Login

Installing stator question

Moderators: Curt!, Pa

<<

Busterman

Posts: 19

Joined: Wed Nov 09, 2011 5:05 pm

Post Thu Nov 01, 2012 12:35 pm

Installing stator question

Installing stator in my 1991 FLT. I used blue locktite on four torx head bolts that fasten stator to case. There are two small phillips head screws that secure nylon bracket which fastens stator plug to case. Do you use blue locktite on these two small phillips head screws? The manual does not say , I also have concern it I locktite them in I will not be able to remove them in future due to small size of screws, however I do not want them to back out when engine is running. I have gotten several conflicting opinions on this and would appreciate any advise before I screw it up. Thanks!!
<<

ralph

Posts: 23

Joined: Sun Dec 19, 2010 6:36 pm

Post Fri Nov 02, 2012 4:30 am

Re: Installing stator question

Use blue locktite and they will only come out when you want them to.
<<

woody

Posts: 485

Joined: Mon Apr 15, 2002 12:01 am

Location: Wa, USA

Post Fri Nov 02, 2012 10:50 am

Re: Installing stator question

There is also a purple Loctite that is made for small screws.
<<

PanPal

Posts: 13

Joined: Sun Jan 20, 2008 6:32 pm

Post Fri Nov 02, 2012 3:56 pm

Re: Installing stator question

There is also a purple Loctite that is made for small screws.


I was going to say red, but this is what I would use also for small screws.

Return to Evo's Thru 99

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.