FAQ  •  Register  •  Login

Need some help with a piston

Moderators: Curt!, Pa



User avatar

Posts: 1635

Joined: Thu Jun 27, 2002 12:01 am

Location: Interlaken, NY USA

Post Tue Jan 07, 2014 8:07 pm

Need some help with a piston

I started to put this under the "cylinder bores" thread, but opted for a new one.
I picked up a set of 11 fin cylinders last Summer, and one of the pistons got bent in shipping.
I'm hoping someone out there on the web board can help out.
I need a replacement .070" 3.422 piston. These cylinders have been bored to .070 over 3.422, and been run at some point.
The bores are in fine shape, the pistons fit well, but the one's skirt got bent pretty badly by a cylinder when they were shipped to me. I don't want to go with aftermarket pistons, 'cause they are all sized to the 3 7/16" bore.
So, does anyone out there have one 3.422, .070 over piston I can use to salvage this set of jugs?
Thanks for any and all help,


User avatar

Posts: 570

Joined: Fri Oct 01, 1999 12:01 am

Location: Spokane WA USA

Post Tue Jan 07, 2014 8:42 pm

Re: Need some help with a piston

Just checked my stock,
Sorry .060 is all i got.

Return to Big Twin Flatties

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.