FAQ  •  Register  •  Login

UL Cylinders

Moderators: Curt!, Pa

<<

Andyj

Posts: 4

Joined: Wed Aug 01, 2012 1:16 pm

Post Thu Aug 02, 2012 4:37 am

UL Cylinders

Hello folks. First post here so here goes.
The name's Andy and I live in England.
I'm cutting a long story short here but I've got a 1945 UL. It started running a bit rough and on investigation I've discovered whoever built the engine had
installed liners into the cylinders. ( Yeah, I know ! I've now got a three piece front jug !! )
Obviously I need to replace the cylinders so I'm looking for opinions on which way to go, good used ( are there any out there? ) S&S ( only available as 80 in so I'll need to change the carb? ) or "other" repops. I'm no stranger to working on old Harleys but I'd appreciate any input before I start spending money like a madman.

Thanks
Andy

Image
<<

amklyde

Posts: 625

Joined: Fri Dec 19, 2003 1:01 am

Location: Wisconsin, USA

Post Thu Aug 02, 2012 6:50 am

Re: UL Cylinders

Buy the new S&S cylinders. Good used are hard to find and almost always have some trouble, bad guide holes, Deep cut valve seats, stripped headbolt holes etc. I wouldn't touch the India made cylinders.

Return to Big Twin Flatties

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007, 2012 phpBB Group.