- Accelerator Pump Diaphragm
- Fits Super E & G and Two Throat Carbs
|
- Accelerator Pump Rebuild Kit
- Fits Super E & G gas carbs
- Includes diaphragm, diaphragm spring, check balls, check ball spring, pump pushrod, and required hardware and o-rings
|
- Accelerator Pump Spring
- Fits Super B, D, E, and G Carbs
- Stainless Steel
|
- Bellows Seal
- Fits Super E and G and Two Throat Carbs
- Nitrile
|
- Bowl gasket
- Fits Super B & D gas carbs
- Sold individually
|
- Bowl Gasket
- Fits Super E & G Carbs
|
- Accelerator Pump Rebuild Kit
- Fits S&S Two Throat Carbs
|
- Fits Super A & B Series Carbs
- Include stainless steel throttle shaft bushings
- Fits forked or wire type float
|
- Carburetor body rebuild kit
- Includes throttle shaft nuts, nylon washers, accelerator pump o-ring, and accelerator pump boot
- Fits Super E Series gas carbs
|
- Carburetor body rebuild kit
- Includes throttle shaft nuts, nylon washers, accelerator pump o-ring, and accelerator pump boot
- Fits Super G Series gas carbs
|
- Fits MGAL and GAL series carbs
- Everything needed to completely rebuild one carburetor
- Fits Super GAL & MGAL Series Carbs
|
- Fits Super A & B
- Everything needed to completely rebuild one carburetor.
- 1983 - Up Wire Type Mechanism
|
- Super A and B gas carbs
- Everything needed to completely rebuild one carburetor
- 1983 and earlier fork type mechanism
|
- Carburetor master rebuild kit
- Fits Super E Series carbs
- Regular gas Inlet
|
- Carburetor master rebuild kit
- Fits Super G Series carbs
- Regular gas Inlet
|
- Carb bracket
- Fits Two Throat Carbs
- 1957 - ' 85 xl
|
- Air cleaner to head support bracket
- 1957 - 1985 big twin
|
- Diaphragm Spring
- .485" X .525", Fits Super E &G Carbs
- Sold individually
|
- Enrichment Plunger Nut
- 7/16-20 X .520" , Brass
- Fits Super E & G Carbs
|
- Enrichment plunger spring
- .228" X .270" X 1.781"
- Stainless Steel Wire
|
- Float Pin
- .096" X 1.170" Brass
- Fits Super E & G Carbs
|
- Float retaining pin
- For fuel and turbo carbs
- Super B and D carbs
|
- Carburetor Master Rebuild Kit
- Fits Super GBL Series Carbs
- Everything needed to completely rebuild one carburetor
|
- Idle Mixture Screw Spring
- Fits B, D, E, & G Carbs
- Stainless Steel Wire
|
- Bowl gasket
- Fits L-Series carbs
- Pack of 5
|
- Carburetor Body Rebuild Kit
- Fits "L" Series Carbs
- Stainless Steel Throttle Shaft Bushings included
|
- Sizes .084-.120 inch
- Fits All S&S Super Carbs
|
- Sizes .042-.060 Inch
- Fits All S&S Super Carbs
|
- Intermediate and Main Jets
- Various Sizes
|
- Carburetor Master Rebuild Kit
- Fits Super MGL Series Carbs
- Everything needed to completely rebuild one carburetor
|
- Pump Actuator Arm
- Fits Super E & G Carbs
|
- Pump Actuator Lever
- Fits Super E & G Carbs
|
- Fit All S&S Super Alcohol, Fuel, and Turbo Carbs
- One each: (0.46", .050", .060"), (.060", .070, .080"), (.080" .090" .100") or One Blank
|
- Fits all Super 1 7/8", 2 1⁄4" fuel carburetors
- Sizes available .120" to .300", in increments of .005"
- Sold individually
|
- Fits all S&S Super 1 7/8", 2 1/16", 2 1/4"
- Late Style GAL, GBL, MGAL, MGL Carbs
- Fits 2 Throat Carbs
- Choose .040 - .120 Inch
- Sold Individually
|
- Fits all Super 1 7⁄8", 2 1/16", 2 1⁄4" Gas Carburetors.
- .025", .0265", .028", .0295", .031", .032", .033", .036", .040".
- Sold Individually
|
- Bowl Gasket
- Fits Super B carburetor
- Fuel and turbo carbs
|
- For Gas Carbs
- 1-7/8 Inch bore
|
- Carburetor Master Rebuild Kit
- Fits Super D Gas Carbs
- 1985 - Up Wire Type Mechanism
|
- For Gas Carburetors
- Fits Large 2.150 Inch Venturi
|
- Fits Gas Carbs
- Fits 1.937 Inch Venturi
|
- 2-1/4 Inch
- For Alcohol and Turbo Carbs
- Wire Type Float
|
- Carb Bowl Assembly
- No internal components installed
- Bowl Only
|
- 1-7/8 Inch
- Carb Body Only
|
- Bowl Gasket
- Fits Super E & G Carbs
- 10 Pack
|
|
|
- 2-1/16 Inch
- Carb Body Only
|
- Threaded Bowl Plug
- 1/2-20 UNF-2A
- Brass
|
- Fits GBL series carbs
- 1.75"
- Brass
|
- Throttle Return Spring
- Fits Super E & G Carbs
- Stainless Steel Wire
|
|
