- Needle & seat assembly
- For Super B and D Fuel Carbs
|
- Magneti Marelli® or Delphi® Style
- 1995–'05 Big Twins
- Requires S&S® VFI Module
|
- 2.5" length
- Fits Super A, B, and L series carbs
|
- 2.5" Air Horn
- Fits Super A and B and L - Series Carbs
|
- Short (2.5") or Long (4")
- Mounting Screws Included
- Fits S&S Super E and G carbs
|
- 1966–Up Big Twins and 1957–Up XL Models
- Manifolds Must Be Ordered Separately
|
- For SA B2 Big Fin Style Heads
- Front & Rear Flanges and O-rings
|
- For SA B2 Big Fin Style Heads
- Choose Front or Rear Flange
|
- For Engines with S&S SA B2 Heads
- Choose Displacement
|
- SHCS 3/8-16 X 1-1/4"
- Bright Zinc Finish
|
- SHCS 3/8-16 X 1-3/8"
- Bright Zinc Finish
|
- For SA B2 Big Fin Style Heads
- One
|
- For Engines with B2 Heads
- Super D
- Dual Bore SA VFI
- G-Extreme™ Dual
|
- 2.625" ID X 2.875" OD
- Viton
|
- Hardware Included
- Fits Super E and G Gas Carbs
|
- Hardware Not Included
- Choose Carb
|
- Fit All S&S Super Alcohol, Fuel, and Turbo Carbs
- One each: (0.46", .050", .060"), (.060", .070, .080"), (.080" .090" .100") or One Blank
|
- Fits all Super 1 7/8", 2 1⁄4" fuel carburetors
- Sizes available .120" to .300", in increments of .005"
- Sold individually
|
- Fits Dual Bore VFI
- For Large Displacement Engines
- Chrome
|
|
|
|
|
|
- Converts Super D Gasoline Carburetor
For Use With Alcohol
|
- Teardrop or Slasher™ Cover
|
- Fits E and G Extreme Carbs
- 2 Inch Filter Included
- Polished Finish
|
- Fits E and G-Extreme Carbs
- 4 Inch Filter Included
- Polished Finish
|
- Chrome Slasher Cover
- High Flow Filter
|
- Fits Super E & G carbs
- 2-1/2" length
|
- Fits Super E & G carbs
- 4" length
|
- S&S Air Horn
- 4" long
- Fits Super D Carburetors
|
- Dual Carb Kit
- Carburetors Only
|
- For 124 Inch And Larger Engines
- Includes Throttle Shaft Linkage
- Manifold - Induction Not Included
|
- Manifold Not Included
- Fuel Pump Not Recommended
- 1966-Up Big Twin Models
|
- For S&S T145 TCSA Engines
- Manifold and Air Horn Included
- 1999-2006 Big Twin Models
- Not For 2006 Dyna®
|
- Racing Applications
- Alcohol Only
- Carb and Jets Only
- 1966-Up Big Twin Models and 1957-Up XL
|
- For Up To 100 Inch Engines
- Carburetor and Jets Only
- For Big Twin Models and XL Models
|
- Manifold Not Included
Alcohol/Nitromethane
-
- Carb and Jets Only
|
- Racing Applications
- Carb and Jets
- 1966-Up Big Twin Models and 1957-Up XL
|
- B and D Fuel and Turbo Carbs
|
- Carburetor Body Rebuild Kit
- Fits Super D Gas Carbs
- 1985 - Up Wire Type Mechanism
|
- Fits Super B and D Fuel or turbo carbs
- 1-7/8" X 1"
- Use with all S&S 1-7/8" manifolds
|
- Fits Super D Series Carbs
- 2-1/4" X 1"
- O-Ring Included
|
- Fits all Super 1 7⁄8", 2 1/16", 2 1⁄4" Gas Carburetors.
- .025", .0265", .028", .0295", .031", .032", .033", .036", .040".
- Sold Individually
|
|
