My Garage x


Note: We have recently updated our fitment data. You may need to resave your Year / Make / Model rides into your garage for proper results.



You must login to add rides to your garage.
Login

x

Year:
Make:
Model:
 
Find A Local Dealer

Facebook

Youtube

PERFORMANCE MOTORCYCLE PARTS AND KITS FOR AMERICAN V-TWINS

S&S Cycle logo
My Garage / My Ride
  • Year  
  • Make 
  • Model
0 Items
$0.00

.513" Lift Camshaft—Generator

 
$189.95
SKU:
106-6028
Qty:
 
Dealer Only Item

 
 
Facebook Twitter
 
 
 
Description
Product Reviews
Specs
Fitment
Instructions

These camshafts are for 1954–'84 big twins with either the Hydraulic Conversion kit or the Cylinder Head Replacement kit for panhead engines. They are also replacement parts for Flathead Power® P-Series and SH-Series engines. Since these kits and engines include 1984–'99 style hydraulic lifters,the larger late style roller diameter requires that cams designed for 1984–'99 models must be used to achieve correct valve timing. When choosing a late style cam for this type of engine, be aware that, due to the approximate 1.5:1 rocker ratio of most aftermarket rocker arms for shovelheads, the total valve lift will be reduced by about 9% from the specified value. The specification chart shown here shows specs as used in a pan or shovel engine. These cams are available in generator and alternator styles.

Fits:

  • 1954–'65 engines with S&S Head Update kit
  • 1966–'84 engines with Hydraulic Conversion kit
  • P-Series and SH-Series engines
  • Custom generator style engines with 1984–'99 style top end



Features and Benefits:

  • Quality construction – Made in-house by S&S Cycle in Viola, WI
  • Higher lift and increased valve timing for better performance
  • Quiet, dependable hydraulic valve train when used with S&S Hydraulic Conversion kits

 

Cam Specifications for 1954–’84 Big Twin Engines Requiring 1984–'99 Style Cams 
Cam Application 
Generator Part # Alternator Part # Valve Timing1 Open/Close   Valve Duration   Valve Lift Lift @ TDC2   Spring Spacing Required Tappet Type Required
Intake   Exhaust   Intake   Exhaust   Intake   Exhaust  
513 74"–84" Stock or low compression  106-6028   106-6027   18°/38°   40°/18°   236°   238°   .472"   .163"   .187"   No   Hydraulic  
585 74"–80" engines 8.5:1 - 9.5:1 CR 84" - 93" up to 8:1 - 9:1 CR   33-5131   33-5109   20°/45°   60°/20°   245°   260°   .540"   .172"   .166"   Yes   Hydraulic  
600 93"–103" engines 9:1 - 10:1 CR   33-5132   33-5058   20°/55°   60°/20°   255°   260°   .554"   .177"   .170"   Yes   Hydraulic  
631 High RPM Cam for 93"–103" Engines 11:1+ CR   33-5078   33-5080   34°/61°   66°/29°   275°   275°   .581"   .359"   .204"   Yes   Solid or Hydraulic  
640 93"–Up Engines 10:1 or Greater Compression
106-4639   33-5108   25°/60°   65°/20°   265°   265°   .590"   .205"   .192"   Yes   Hydraulic  

1Timing designation is function of zero lash @ .053" off base circle. Lifts based on 1.5:1 Rocker Ratio.  2Lifts at TDC are measured at the valve and are for reference only. Overlap valve lifts must be checked on assembled motor. 



 

 

 

NOTES:In order to achieve stated timing specifications, these cams must be used in engines with 1984–'99 style tappets.
These cams should not be ordered as replacement parts for early S&S SH-Series engines, or for any shovelhead engine equipped with stock valve train. For replacement parts for these engines, select stock style cams and tappets.

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Add Review
Add Review
Name:
Review:
Rating:
 
 
 
 
 
 

(Your browser will be redirected back to this page)