S&S® REMANUFACTURING SERVICES

S&S Cycle's professional remanufacturing services are available to all authorized S&S dealers. As an authorized S&S dealer you have the ability to send S&S components in to have them remanufactured to factory fitment specifications. From engines to oil pumps, pretty much any S&S component can be remanufactured. This means that rather than replace an engine when it has run its course – for about half the cost of a new engine, trained S&S remanufacturing technicians can return your customer’s engine to factory specifications. The remanufactured engine will have new bearings and bushings (as required), new pistons, oil pump components, head bolts, camshaft(s),tappets, gaskets, seals and replacement hardware. Additionally, the carb will be remanufactured. A remanufactured S&S engine carries a full one-year parts and labor warranty.

WHAT'S INCLUDED

Typical S&S remanufacturing procedures available for S&S P-Series, SH-Series, V-Series, and T-Series engines:

• Crankcases – replace bearings and refit pinion race
• Gear Cover – replace camshaft and pinion bushings
• Flywheel Assembly – repair flywheels, rebuild connecting rods and replace pinion shaft and crankpin, true and balance assembly
• Cylinder Heads – remanufacture with new oversize valves and springs and replace seals
• Cylinders and Pistons – bore and hone cylinders to accommodate new pistons and rings
• Oil Pump – remanufacture with new seals and gaskets
• Carburetor – remanufacture to factory new specifications
• Reassemble – complete assembly with new camshaft(s), tappets, gaskets and seals

LET US MACHINE IT FOR YOU!

S&S Cycle offers specific precision machine shop services to Authorized S&S Dealers. From installing a complete Hot Set Up Kit® to installing thrust washers in a flywheel assembly, our factory certified technicians can be a part of your shop. Why stress over buying machine shop equipment when we can do it for you? Instead of sending your machine work out to an automotive shop, send it to the people that know your S&S engine best. If a customer wants a big bore S&S Hot Set Up Kit® installed in their Harley-Davidson® Evolution®, Twin Cam 88® or Twin Cam 88B™ engine, our technicians will do it all for you — Machine the cases, fit the pistons to the cylinders and assemble the entire engine—all you do is remove the engine from the frame and ship it to S&S! This frees up your in-house technicians to work on other jobs while S&S builds the engine for you. Our machine shop facility is equipped with state-of-the-art equipment and you can rest assure that our technicians are trained to know everything there is to know about S&S engines and hop-up kits.

S&S® MACHINE SHOP SERVICES AVAILABLE:

• Hot Set Up Kit installation – including machine cases, fit pistons and rings to cylinders and assemble engine
• Timken® sprocket shaft bearing conversion in 2003-later stock Twin Cam 88® and Twin Cam 96™ crankcase
• Machine S&S heads to raise compression ratios
• Dual-plug S&S heads for shovels
• Fit pistons to cylinders
• Install thrust washers in flywheel assembly
• Install valve guides and seals
• Machine crankcase breather bore
• Machine crankcase spigot bores for big bore kits
• Machine gasket surfaces – cylinder heads, cylinders, and cases

Watch S&S Remanufacturing with Wally Cahill